JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS23x, 34x, 43x 11
2 Hardware - Intelligent products
This chapter ONLY covers intelligent products which are based on either the SMC75 or
SMC85 stepper controller.
The following pages explains how the I/O, Power supply, Interface etc. can be connected
and used.
Please notice that the SMC75 controller PCB is used in all the MIS23x motors and the
SMC85 controller PCB is used in all the MIS34x motors.
To Next Page
Loading...
Need help?
General
