JVL MIS23 Series User Manual

96 JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS23x, 34x, 43x
6.1 Passive Mode
6.1.1 Passive Mode
After power up, the controller will start up in passive mode. This means that it is possible
to communicate and read/write to/from registers, but no current is supplied to the mo
-
tor. It should thus be possible to turn the motor shaft as no voltage is connected to the
motor. If there is encoder feed-back, the encoder counter will always register the cor
-
rect position.

JVL MIS23 Series Specifications

General

Brand	JVL
Model	MIS23 Series
Category	Engine
Language	English