JVL MIS23 Series User Manual

JVL Industri Elektronik A/S - User Manual - Integrated Stepper Motors MIS23x, 34x, 43x 209
9.7 Graphic programming command reference
9.7.20 Set position
9.7.21 Zero search
Icon:
Dialogue:
Function: Sets the current position stored in register no. 10 (P_IST) to one of three
position values stored in the user memory area. This is the reverse of the ‘Save
position’ command.
Icon:
Dialogue:
Function: Initiates a zero search. The program waits until the zero search has completed
before proceeding to the next command. For a detailed description of how to
set up a zero search, refer to Zero search modes, page 108

JVL MIS23 Series Specifications

General

Brand	JVL
Model	MIS23 Series
Category	Engine
Language	English