Control and Display Elements
122
7.3.6 Switching REHEAT mode on/off
Fig. 60
REHEAT mode = (demoisturising the cab air)
Switching on REHEAT mode:
• Press the
key
The symbol
(REHEAT mode on) is indicated on the display.
NOTE
In REHEAT mode,
– the compressor is switched on permanently to vent the cab air.
– the evaporator speed can still be adjusted manually.
– the control unit switches on the heating as required to prevent the cab temperature from
changing.
REHEAT mode is automatically limited to 60 minutes.
Switching off REHEAT mode:
• Press the
key.
REHEAT mode has been switched on. The
symbol is no longer displayed.
To Next Page
Loading...
