Krone BiG X 770-3 - Menu 4-1-11 Diagnostics Electronics

Info centre "EasyTouch"
362
8.8.1.12 Menu 4-1-11 Diagnostics electronics
Fig. 270
• Select menu 4-1-11 “Electronics”.
The “Electronics” diagnostics menu is divided into four displays:
–
Display 1
“Sensor test KMC2”
–
Display 2
“Sensor test KMC3”
–
Display 3
“Sensor test DIOM”
–
Display 4
“Autopilot sensor test”
Display 1 "Sensor test KMC2"
5 6
7 8
B C D
BX500142
I
Fig. 271
The display 1 "Sensor test KMC2" can be used to check the input and output voltages at the
control unit A2 "KMC2". Furthermore, the value of the terminating resistor fitted in the control
unit can be checked.
Mask description display 1 "Sensor test KMC2"
BMK
Screen display/icons/description
KMC2 volt.12V sen.
. . . mV
D610
Supply voltage 12 V for the sensors at the KMC2 in mV.
KMC2 volt. 8V digit.
. . . mV
D611
Supply voltage 8 V (digital) for the outputs of the KMC2 in mV.