Maintenance – supply system
670
24.1.3 Remove the feed attachment with installation cart
Risk of injury when working on the lifting unit!
When working on the lifting unit or when opening/closing the stop cocks on the lifting cylinders,
the lifting unit and attached components may perform unexpected movements. As a result,
people may be injured.
• To secure the lifting unit from unintentionally lowering, close the stop cocks.
• To reach the stop cocks safely, swivel open the tool box, go under the machine and actuate
the stop cocks.
Prerequisites:
– The front attachment is removed, see the separate operating instructions for the front
attachment.
Fig. 605
• Move three-way stopcock (1) to "Maize" position, see information label.
• Start the engine.
• Move the traction drive release switch to position "off".
• Move the field release switch to position "on".
• Move lifting unit all the way up.
• Switch off the engine.
To Next Page
Loading...
