Krone BiG X 770-3 - Entering Parameters

Info centre "EasyTouch"
230
8.4.1.1 Entering parameters
5 6
7 8
B C D
BX500147_2
1 2
34
Fig. 167
Item
Explanation
1
Press the key to reset all parameters of the selected menu to the basic setting.
2
Press the key to call up the technician level (password-protected).
3
Press the key to call up the control panel for optional components, this can only be
done by KRONE customer service.
4
Press the key to go back to the previous mask.
• You can use the incremental encoder to select the required parameter, the selection box is
highlighted in colour.

NOTE
Only input fields highlighted in light blue can be changed. If a parameter value of 99999 and
grey font are displayed, the associated control system is not in operation.
• Press the incremental encoder to jump to the selection box.