Krone BiG X 770-3 - Performing Counterweighing

Appendix – CropControl System
67
CC8000037
Fig. 66
Overview icons
Pos: 12.42 /BA/Info-Center/CropControl BiG X 600-1100-1/Gegenwiegung durchführen_Calibrate @ 483\mod_1478596419018_78.docx @ 3258782 @ 4 @ 1
1.4.7.2 Performing Counterweighing
There are two possibilities to start and stop counterweighing.
2. Performing counterweighing on the working screen of CropControl
• Position the empty tractor/wagon combination next to the machine.
• To start counterweighing, press function key .
The status line displays the number of the currently active control weighing next to the
icon.
Notice: Memorise the number of the counterweighing and write it down.
• Load the tractor/wagon combination. Ensure that all harvested chopping crops are loaded
on the tractor/wagon combination.
• Press the function key to stop active counterweighing.
• Weigh the tractor/wagon combination. Make sure no crops are lost when travelling to the
scale.
Pos: 12.43 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Icons
Description
Set correction factor
Start counterweighing
Stop counterweighing (here counterweighing 1)
Display list with made counterweighings
Counterweighing without correction
Counterweighing with correction
Counterweighing deleted
Counterweighing with correction via AutoCalibrate