Krone BiG X 770-3 - Attaching the Spout End Piece (8- and 10-Row)

Start-up – Spout extension
499
14.1.4 Attaching the spout end piece (8- and 10-row)
Fig. 429
• Pick up the spout end piece (1) using a suitable sling.
• Hook the spout end piece (1) into the receivers (3) of the spout basic (2).
• Secure the spout end piece (1) with the screws (4, 6) on the spout basic (2).
• Connect the hydraulic hoses (5) to the hydraulic lines.
Fig. 430
• Establish the plug connection (1).
• Fit the cover (3) and attach with the nut (2).