Krone BiG X 770-3 - Full Beam; Headlamp Flasher

Control and Display Elements
146
7.8.2 Full beam
Fig. 87

NOTE
Full beam does not function until the dipped beam has been switched off.
If a vehicle is approaching, switch off full beam to prevent dazzling the driver.
To switch on full beam:
• Press the steering column switch (1) downwards.
The steering column switch locks in this position and full beam is switched on.
To switch off full beam:
• Move the steering column switch (1) to the neutral position.
When full beam is switched on, the blue indicator lamp for full beam (2) lights up.
7.8.3 Headlamp flasher
Fig. 88
• To activate the headlamp flasher, pull the steering column switch (1) briefly upwards.
As long as the steering column switch is pulled, the full beam and the blue full beam control
lamp (2) light up.