Krone BiG X 770-3 - Menu 1-9 Owners Address

Info centre "EasyTouch"
250
8.4.12 Menu 1-9 Owner's address
24
März
M o nt a g
Fig. 186
Main menu 1 Settings is opened.
• You can use the incremental encoder to select menu 1-9 Owner's address.
• Press the incremental encoder.

NOTE
A maximum of 30 characters per input field can be entered. The information is used for every
printout on the CAN printer, see page 422. If a row contains no characters (and no spaces),
then the row is omitted from the printout.
Carrying out the setting
• You can use the incremental encoder to select the required selection window, the selection
box is highlighted in colour.
• Press the incremental encoder to jump to the selection box.
• You can use the incremental encoder to select the required setting.
• Press the incremental encoder to accept the setting and to exit the selection box.
1
2
Fig. 187

NOTE
Select and confirm the "ESC" symbol (1) to exit the input field without saving the entries or
changes. By selecting and confirming the "Enter" symbol (2), the entry or change is accepted
and saved
• Press the key
under to call up the working screen