Safety
60
3.8.4 Fire extinguisher
Fig. 10
The machine must not be operated without an on-board fire extinguisher which contains
at least 6 kg of extinguishing agent. The manufacturer recommends a powder fire
extinguisher for fire classes A, B and C.
The support (1) for the fire extinguisher is located in the direction of travel at top left of the
machine and can be reached via the ladder and platform.
• Before starting up the machine, ensure that the fire extinguisher is operational.
Have the fire extinguisher registered. This is the only way to ensure that maintenance is carried
out in good time (according to EN 3 every two years at the latest) and can be verified.
• Before starting up the machine, check that the fire extinguisher is attached and ready for
use, see page 620.
• Follow the operating instructions for the fire extinguisher and consult the website of the fire
extinguisher manufacturer.
• Check fire extinguisher for external damage. In the event of anomalies, inform a responsible
maintenance company.
The inspection intervals in other countries may be different. In this case, the stipulated
inspection intervals of the country of operation apply.
• Observe the provisions of the corresponding countries.
To Next Page
Loading...
