Operation
555
18.3.4 Disconnecting trailer for Italy
Risk of injury due to unexpected movements of machine and trailer!
If there are people between the machine and trailer during the coupling process and if the
uncoupled trailer moves in an uncontrolled manner, there is a risk of injury.
• When coupling, ensure that there is nobody between the machine and trailer.
• Secure the trailer against rolling away.
Fig. 494
• Secure the trailer against rolling away.
• Remove the power supply plugs.
• Disconnect the compressed air hoses if a compressed air connection is available (optional).
• Disconnect the hoses from for the auxiliary hydraulics (optional).
If the trailer has a supporting wheel:
• Screw down the supporting wheel.
To disconnect the trailer:
• Pull the split pin (1) out of the bolt (2) and remove the pin with the handle (3) upwards out of
the trailer coupling.
• Slowly move the machine forwards until the towing ring is removed from the trailer coupling.
• Insert the bolt (2) into the trailer coupling and secure with the split pin (1).
To Next Page
Loading...
