Info centre "EasyTouch"
421
8.12.3 Warning message
The warning messages are included with an error number in the list of error messages in the
appendix.
Fig. 325
If one or more conditions are not fulfilled when an action is executed, the corresponding warning
message appears. The error number and error message are displayed.
Resetting warning messages
Press the
key under to acknowledge the warning message.
• Press the
key under for switching off the signal tone.
NOTE
The warning messages must be observed and checked, otherwise this may cause damage to
the machine and malfunctions.
Description, possible cause and remedy of the message, see page 761.
To Next Page
Loading...
