Krone BiG X 770-3 - Hydraulic Oil Tank; Oil Level Check and Oil Change on the Hydraulic Tank

Maintenance - hydraulic system
717
25.3 Hydraulic oil tank
25.3.1 Oil level check and oil change on the hydraulic tank
Prerequisites:
– The machine is parked on level ground.
– The lifting unit is fully lowered, see page 140.
– The spout is in parking position, see page 140.
– The machine is shut down and secured, see page 41.
Fig. 671
To check the oil level:
• Perform a visual inspection to check that the hydraulic oil is up to the middle of the
inspection glass (1).
• If this is not the case, top up hydraulic oil via the oil filler pipe, see page 717.