Krone BiG X 770-3 - Menu 1-7-1 Day;Night Mode

Info centre "EasyTouch"
241
8.4.7 Menu 1-7-1 "Day/night mode"
5 6
7 8
B C D
BX500611_1
5 6
7 8
B C D
BX500612
Fig. 177
In menu 1-7-1 "Day/night mode", you can set the brightness of the display.
When driving at night, the display should be dimmed so that the driver is not dazzled.
Menu 1-7 "Display" is active.
• You can use the incremental encoder to select menu 1-7-1 "Day/night mode".
• Press the incremental encoder.
The display shows the settings for day and night.
= Day design
= Night design
The value after the icons
/ indicates the set brightness value.
The higher the value, the brighter the display.
Carrying out the setting
• You can use the incremental encoder to select the required selection window, the selection
box is highlighted in colour.
• Press the incremental encoder to jump to the selection box.
• You can use the incremental encoder to select the required setting.
• Press the incremental encoder to accept the setting and to exit the selection box.