Maintenance – Engine
654
22.8.1.2 Replacing safety cartridge
NOTE
Safety cartridge must not be cleaned and used again.
Fig. 577
• Unscrew the nut (1) and remove the cover (2).
• Unscrew the nut (3) and carefully remove the filter insert (4).
• Unscrew the nut (5) and carefully remove the safety cartridge (6).
• Clean the interior area and the sealing surfaces of the filter housing.
• Insert a new safety cartridge.
• Install the cleaned or new filter insert (4).
• Mount the cover (2) using nuts (1).
To Next Page
Loading...
