Krone BiG X 770-3 - Setting the Minimum Speed

Info centre "EasyTouch"
431
8.14.3 Setting the minimum speed
BX500609_1
5 6
7 8
B C D
2
Fig. 333
• Using the incremental encoder, choose the input field for minimum speed (1). The input field
is highlighted in colour.
• Press the incremental encoder to jump to the input field. The input field is highlighted in
yellow.
• Turn the incremental encoder to the left or right to reduce or increase the minimum speed
value.
• Press the incremental encoder to accept the setting and to exit the selection box.
The load limit control decelerates the traction drive to the saved minimum speed, even if the
setpoint speed reduction or setpoint load has already been reached or exceeded.