Driving and Transport
540
17.12.3 Swivelling the discharge chute into transport position
Crush hazard due to the moving discharge chute!
People, who are near the drive sprocket of the discharge chute when the discharge chute is
being swivelled, may be injured.
• When swivelling the discharge chute, ensure that there is nobody near the drive sprocket.
NOTE
The spout extension (optional) must be folded in for road travel according to the highway code.
Prerequisites:
– The driver's seat is occupied.
– The diesel engine has been started.
– The release switch road/field is in the "field mode" setting.
– The main coupling is off.
Fig. 481
• To swivel the spout to the transport position, press the key "Spout in transport position" (1).
The discharge chute (2) moves automatically into the transport position.
• Visually check the exact parking position of the spout (2) on the spout holder (3).
• If the spout (2) does not rest centrally on the spout holder (3), raise the spout slightly and
move it exactly into position using the keys on the multi-function lever.
To Next Page
Loading...
