Krone BiG X 770-3 - Deleting a Counterweighing

Appendix – CropControl System
64
Pos: 12.37 /BA/Info-Center/CropControl BiG X 600-1100-1/Gegenwiegung löschen TC @ 484\mod_1479126409573_78.docx @ 3261816 @ 4 @ 1
1.4.6.3 Deleting a Counterweighing
Prerequisite:
– The order for which the counterweighing was performed is started or paused, refer to
chapter Operation, “Operating CropControl System with installed CropControl TC Sync via
KRONE CCI 200 Operating Terminal”, “Creating CCI 200 Order and Performing
Counterweighing”, “Creating Order”.
CC001005
Fig. 59
• To open the counterweighing list, press
.
CC001006
Fig. 60
• Select the desired counterweighing by using the scroll wheel. The selection box is
highlighted in colour.
• To delete the weighing, press . If a value has already been entered, a query will
appear which asks whether the weighing should actually be deleted. Confirm this query.
CC001007
Fig. 61
The counterweighing is marked as deleted. However, a new value can be entered at any time.
Pos: 12.38 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1