Krone BiG X 770-3 - Error Messages (UT)

Appendix – CropControl System
48
Pos: 10.115 /Überschriften/Überschriften 3/A-E/AAlarmmeldungen (UT) @ 484\mod_1478848080526_78.docx @ 3260826 @ 3 @ 1
1.3.13 Error Messages (UT)
Pos: 10.116 /BA/Info-Center/CropControl BiG X 600-1100-1/Alarmmeldungen CC @ 259\mod_1398675864753_78.docx @ 1980563 @ @ 1
CC000889
Fig. 42
Alarm message
If there is a disturbance on the CropControl, an alarm message appears in the display and an
audio signal sounds at the same time (constant horn signal). Description, possible cause and
remedy are listed in chapter “Alarm Messages”.
To stop audio signal:
• Press function key .
To acknowledge the alarm:
• Press function key
briefly, the alarm is acknowledged and the audio signal stops.
If the disturbance occurs again, the alarm message will also appear again.
Pos: 10.117 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1