Engine will be damaged by the heat accumulation after the engine has stalled!
If a warm engine stalls, the heat accumulation, caused by the lack of cooling, may damage the
engine.
• If a warm engine stalls, restart the engine immediately.
• Allow the engine to run at idling speed for at least 2 minutes before finally turning it off.
Risk of injury due to exploding battery gas!
The improper connection of external voltage sources using charging or jumper cables can
cause damage to the electrical system and can lead to an explosion. Short circuiting or
overloading the battery can cause the formation of highly explosive electrolytic gas. People can
be seriously injured or killed as a result.
• To jump start the machine, pay particular attention to the correct voltage and polarity:
connect the positive pole to the positive pole and the negative pole to the negative pole.
Reversing the polarity will create a dangerous short circuit.
• When connecting a battery, always connect the negative pole last
• When disconnecting a battery, disconnect the negative pole first
• Avoid sparking, naked flames and hot or glowing objects in the vicinity of the batteries.
• Switch off charging devices when connecting to or disconnecting from a battery.
To Next Page
Loading...
