EasyManua.ls Logo

Krone BiG X 770-3 - Trailer Coupling

Krone BiG X 770-3
1138 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control and Display Elements
160
7.22 Trailer coupling
CAUTION
Damage to the tow coupling and the components of the drive!
If stuck vehicles are retrieved using the tow coupling or are towed over prolonged distances,
components on the machine may be damaged.
Tow the machine using the trailer coupling at maximum 8 km/h and for not longer
than 45 min.
Do not use the trailer coupling to retrieve the stuck machine.
Do not use the trailer coupling to tow other vehicles.
Do not use the trailer coupling to retrieve stuck vehicles.
NOTE
The trailer coupling may be used on the highway for the transportation of braked cutting system
transporters or braked empty trailers only.
During operation observe the permitted bearing load and the permitted rear axle load of the
machine.
Fig. 109
Item
Designation
1
12 volt socket for lighting
2
Auxiliary hydraulics (optional)
3
Trailer coupling
4
Compressed air connections for two-line brake (optional)

Table of Contents

Related product manuals