Control and Display Elements
123
7.3.7 Manually setting the evaporator fan speed
Fig. 61
Switch on manual evaporator fan speed with the key.
The manual setting for fan speed is now active. The currently set fan speed appears in bar
display
(full bar display = 100%). The AUTO icon no longer appears.
Fan
flashes for 5 s. During this time the fan speed can be increased with the key
or lowered with the
key in increments of 10%.
NOTE
The lowest adjustable fan speed is 30% (three bars are displayed).
If the key is pressed twice, AUTO mode is re-activated, the Auto symbol is
displayed, the
and symbols are no longer displayed.
To Next Page
Loading...
