Krone BiG X 770-3 - General Machine Settings Information Section; Memory Keys

Info centre "EasyTouch"
183
8.2.5 General machine settings information section
8.2.5.1 Memory keys
On delivery, the keys M1 and M2 on the multi-function lever are not assigned any functions.
5 6
7 8
B C D
BX50001
1_1
V
Fig. 127
• To call up the "Memory keys" mask, press the key in the working screen.
Menu item 1-10 can also be used to call up the mask, see page 251.
The following functions can be assigned to the memory keys:
– Raise/lower plant divider (only in maize) / holding-down clamp (only in grass)
– Increase/reduce working width
– Call up stored chop lengths 1 or 2
– Increase/reduce front attachment speed
– Turn pendulum frame left/right
– Extend and/or retract the rear wall of discharge accelerator to reduce and/or increase the
discharge distance.
D