Krone BiG X 770-3 - Continuous Operation

Info centre "EasyTouch"
437
When operating the silage additives unit, check whether the mounted nozzle produces the
required spray pattern and whether the material is wetted with the silage additives.
Colour coding
Dosing quantity
Blue nozzle
2.5 l/min (standard)
White nozzle
>2.5 l/min
8.17.2 Continuous operation
BXSI00004
5 6
7
8
B C D
1
2
3
Fig. 338
In continuous operation, the throughput of the silage additives pump can be adjusted directly by
means of a displayed input field (1). The dosing information (input fields 2 and 3) is not taken
into account during continuous operation.
The flow sensor monitors the flow of silage additives through the silage additives unit. If the flow
sensor is not ready for use, it must be switched off in the settings of the silage additives unit
(input field 9).