Maintenance - Gearbox
734
26.1.8 Maintenance VariLOC Gearbox (Option)
Oil level check
Fig. 689
Prerequisites:
– The machine is shut down and safeguarded, see page 41.
– The intake has been removed.
– A suitable container is available for escaping oil.
WARNING! Risk of injury due to rotating chopping drum! Do not reach into the chopping drum.
• Turn the belt pulley until the identification "Arrow+UP" (2) is in the top position.
• Lock the chopping drum, see page 701.
• Thoroughly clean the area around the locking screw (1).
• Remove the locking screw (1).
• Oil level must reach the inspection hole, if necessary, top up oil (see Oil change).
• Fit the locking screw (1).
• Unlock the chopping drum, see page 701.
To Next Page
Loading...
