Krone BiG X 770-3 - Starter

Maintenance – electrical system
742
27.3 Starter
CAUTION
Damage due to improper handling.
When installing / removing the batteries, an improper procedure may cause a short circuit. As a
result, electronic components may be damaged.
• Interrupt the circuit using the main battery switch and secure to prevent it from being
switched on again.
• Protect the cable contact of the positive lead from accidentally touching components of the
machine.
1
BX770166
Fig. 697
1)
Starter (24V)
If the starter fails or does not work properly, determine the cause of the damage. If the
suggestions below do not repair the damage, ask your KRONE dealer.
Disturbance
Cause, remedy
Starter fails or does not work
properly
The batteries are inadequately charged.
• Charge the batteries.
The connection cable to the starter is loose.
• Tighten the cable connections firmly
The cable connections are corroded.
• Clean the cable connections on the starter and batteries.
The solenoid switch of the starter is defective.
• Have the starter checked by a qualified service centre.