Maintenance
621
20.3.2 Cleaning the machine completely
Eye damage due to flying dirt particles!
When performing cleaning work with compressed air, dirt particles are slung away at high
speed.
• Keep people away from the working area.
• Wear appropriate work clothes (e.g. eye protection) when performing cleaning work with
compressed air.
The machine must be cleaned to ensure reliable operation.
• Clean the machine – in particular the intake, the cutting drum, the radiator compartment and
the radiator – with compressed air or a high-pressure cleaner.
To avoid damage to the machine, only carry out cleaning at low pressure and do not aim the
water jet directly at the following components:
– Electrics/electronics (e.g. plug connections, control units)
– Seals
– Bearings
– Cabin
– Engine compartment
To Next Page
Loading...
