Krone BiG X 770-3 - Weights; Removing the Spout Extension (12- and 14-Row)

Start-up – Spout extension
497
14.1.1 Weights
The following table lists the weights of the spout end piece and the spout extensions:
Component
Weight
End piece 8-row
approx. 80 kg
Extension 10-row
approx. 112 kg
Extension 12-row
approx. 165 kg
Extension 14-row
approx. 180 kg

NOTE
Only transport the spout end piece and spout extensions with suitable slings.
14.1.2 Removing the spout extension (12- and 14-row)
Fig. 424
• Disconnect the hydraulic hoses (1) from the hydraulic lines.
• Close the openings of the hydraulic hoses with the dust caps.
Fig. 425
• Use a suitable sling to secure the spout extension (2) from falling.
• Unscrew the nuts (4) and remove the cover (3).
• Disconnect the plug connection (6).
• Unscrew the screws (1) at the coupling point.
• Disconnect the spout extension (2) from the spout basic (5) set it down safely.