Info centre "EasyTouch"
440
8.18 Error Messages
Fig. 340
The "8000 silage agent tank empty" error message can have the following causes:
• No silage agent in the tank
• The flow sensor is mechanically or electrically defective
• The electrical connections of the flow sensor are defective
• The pump mechanism of the silage agent pump is defective
• The intake pipe or the pump filter of the silage agent system is soiled
• The pressure pipe or the nozzle unit is soiled
The "8001 silage agent pump error" error message can have the following causes:
• Interruption of the pump electrics
• The cable harness towards the pump is damaged
• The power output of the job computer is overloaded and switched off
• Power supply failure (V2- KMC3)
To Next Page
Loading...
