Krone BiG X 770-3 - Setting the Maximum Speed

Info centre "EasyTouch"
430
8.14.2 Setting the maximum speed
BX500608_1
5 6
7 8
B C D
1
Fig. 332
• Using the incremental encoder, choose the input field for maximum speed (1). The input
field is highlighted in colour.
• Press the incremental encoder to jump to the input field. The input field is highlighted in
yellow.
• Turn the incremental encoder to the left or right to reduce or increase the maximum speed
value.
• Press the incremental encoder to accept the setting and to exit the selection box.
The load limit control accelerates the traction drive to a maximum of this set speed, even if the
setpoint speed reduction or setpoint load is not yet reached.