Krone BiG X 770-3 - Jump Starting the Machine

Driving and Transport
524
17.3 Jump starting the machine
CAUTION!
Damage to the machine by connecting the jump-start battery to the starter
If the jump-start battery for jump-starting the machine is connected to the starter, the starter
and the battery will be damaged.
• Never connect the jump-start battery to the starter.

NOTICE
• When using jump start batteries with a voltage of 12 V, first connect the jump start batteries
in series (24 V)
• When using a charging device (24V), which has a jump start function, it must be switched
off before it is connected and disconnected.
Connecting jump start voltage source
12 V
G1 12 V
24 V
G2 12 V
24 V
12 V
G4
Fig. 463

NOTICE
Always connect the batteries of the machine last in order to avoid machine damage.
• Dismount the pole protection caps from the positive poles of the batteries.
• Connect the positive poles of the battery and the jump start voltage source in succession.
• Connect the negative terminals of the battery and the external start voltage source in
succession.
Disconnecting jump start voltage source

NOTICE
Always disconnect the batteries of the machine first in order to avoid machine damage.
• Disconnect the negative poles of the battery and the jump start voltage source in
succession.
• Disconnect the positive poles of the battery and the jump start voltage source in succession.
• Mount the pole protection caps on the positive poles of the batteries.