Info centre "EasyTouch"
439
8.17.4 Crop flow cleaning headland
"Crop flow cleaning headland" mode is used to prevent the crop flow plates from sticking due to
crops which contain sugar. "Crop flow cleaning headland" mode is the most effective method of
cleaning the crop flow plates, provided the "water injection" retrofit kit has been installed. If the
"water injection" retrofit kit has not been installed, water will run out of the silage additives
nozzle only and the plates in the crop flow will not be wetted with silage additives.
The active pumping of silage additives is indicated by a green background colour on the status
display.
Crop flow cleaning headland active, water pumping inactive.
Crop flow cleaning headland active, water pumping active.
To Next Page
Loading...
