Maintenance – central lubrication system
746
29 Maintenance – central lubrication system
Damage to the machine due to the use of incorrect and contaminated lubricants!
Unauthorised or contaminated lubricants in the central lubrication system will cause faults in the
central lubrication and damage the bearing positions.
• When working on the central lubrication system, use clean and suitable tools.
• Use authorised lubricants only.
• Ensure that dirt or dirty lubricant cannot get into the central lubrication system.
29.1 Overview of the distributor blocks of the central lubrication system
NOTE
The distributor blocks have one grease nipple each (red cap) for lubrication with a grease gun if
required.
To Next Page
Loading...
