Maintenance – supply system
664
24.1.2 Attaching the feed attachment with front attachment
Fig. 593
• Move three-way stopcock (1) to "Maize" position, see information label
Fig. 594
• Check the locating points at the intake and the machine for contamination and clean them if
necessary.
• Ensure that no lines or cables become jammed.
• Move the machine up to the intake.
• Raise the lifting unit using the keys (3) until the intake is correctly received by the retainer
hooks of the chopping drum housing.
• Raise the lifting unit slightly until the support jacks are free.
To Next Page
Loading...
