Maintenance – supply system
677
24.1.4 Attaching the feed attachment with installation cart
Fig. 617
• Move three-way stopcock (1) to "Maize" position, see information label.
• Start the engine.
• Move the traction drive release switch to position "off".
• Move the field release switch to position "on".
Fig. 618
• Move intake up to the machine and raise lifting unit using the keys (3) until the intake is
correctly received by the holder of the cutting drum frame.
• Ensure that no lines or cables become trapped.
• Raise the lifting unit slightly until the support jacks are free.
To Next Page
Loading...
