Driving and Transport
539
Fig. 480
To raise the front attachment (3):
• Press and hold down the "Manually raising lifting unit" key (1) on the multi-function lever.
The front attachment (3) is raised as long as the key is pressed.
Front-attachment-dependent lifting height for folded in maize header:
• For EC 600-3, EC 750-3, EC 900-3, EC 603, EC 753 and EC 903, set the lower edge of the
front safety device on the front attachment to a height of 950 mm above the ground.
• For EC 600-2 and EC 6000, set the lower edge of the side skids on the front attachment to
a height of 350 mm above the ground.
• For EC 750-2 and EC 7500, set the lower edge of the side skids on the front attachment to
a height of 200 mm above the ground.
The attachment heights for the front attachments are identical for 2-axle and 3-axle
machines, irrespective of their permissible axle loads.
During road travel, active vibration damping operates continuously which is also active if the
operator button has not been pressed after the diesel engine has been switched on.
To Next Page
Loading...
