Appendix – CropControl System
68
Pos: 12.44 /BA/Info-Center/CropControl BiG X 600-1100-1/Durchführung einer Gegenwiegung im Task Controller des ControlMobiles @ 484\mod_1479127630854_78.docx @ 3261909 @ 4 @ 1
2. Performing a counterweighing in the TaskController of ControlMobile
• Position the empty tractor/wagon combination next to the machine.
• An order is started and is running, refer to chapter Operation, “Operating CropControl
System with Installed CropControl TC Sync System via KRONE CCI 200 Operating
Terminal”, “Creating ControlMobile Order” and “Performing Counterweighing”, “Creating
Order”.
Fig. 67
• Press to start counterweighing.
The icon changes to . The number of the currently active counterweighing is displayed
under the icon.
Notice: Memorise the number of the counterweighing and write it down.
• Load the tractor/wagon combination. Ensure that all harvested chopping crops are loaded
on the tractor/wagon combination.
• Press to stop active counterweighing.
The icon changes to .
• Weigh the tractor/wagon combination. Make sure no crops are lost when travelling to the
scale.
Notice
While waiting for the weight of the counterweighing, you can continue chopping or another
order can be started.
To Next Page
Loading...
