Krone BiG X 770-3 - Page 141

Control and Display Elements
141
Item
Explanation
1
Memory keys (M1)
2
Memory keys (M2)
3
Activating/deactivating the automatic steering system
4
• Mirror spout (with main coupling switched on)
• Move spout to transport position (with main coupling switched off)
5a
Ejector flap open
5b
Turn spout clockwise.
5c
Ejector flap shut
5d
Turn spout anticlockwise.
6
Memory key for adjusting process lifting gear
7
Slide controller for rotating speed of spout
8
Indicator lamp – traction drive on
9
Inoperative
10
Reduce the engine speed.
11
Switch from rated speed to idle speed and vice versa.
12
Engine speed increase.
13
Switching diesel engine operating mode (optional) (PowerSplit)
14a
Lowering lifting unit manually.
14b
Raising the lifting unit automatically, saving height.
14c
Raising lifting unit manually.
14d
Lowering the lifting unit automatically, saving height.
15
Switching the feed drive/front attachment on and off.
16
Reverse feed drive/front attachment.
17
Save the chopping length.
Folding the spout extension in/out.
18
Traction drive activation key.
19
Selector switch acceleration ramp
20
Cross actuating lever