Krone BiG X 770-3 - Page 143

Control and Display Elements
143
Pos.
Explanation
A
• Acceleration (during forward travel)
• Deceleration (during reverse travel)
• Start travelling gear with activation key pressed (18)
B
Control lever in central position
C
• Acceleration (during reverse travel)
• Deceleration (during forward travel)
• Start travelling gear with activation key pressed (18)
D
• Deceleration to 0 km/h
• Fast reversing with the activation key (18) pressed (in Field mode only)
E
Control lever in central position
F
Switch on cruise control (during forward travel only)
Saving the current speed for cruise control:
• Press the activation key (18) and press the multi-function lever in the direction F.
Activating the "ConstantPower" (option) load limit control:
• In field mode, tap the multi-function lever 2 x briefly to the right.
G
Calling up chop length value 1.
• Press the button (17) and move the cross actuating lever to the left (G) to save
the chop length set in the info centre.
H
Cross actuating lever central position
J
Calling up chop length value 2
• Press the button (17) and move the cross actuating lever to the right (J) to save
the chop length set in the info centre.
K
Lower the spout
• If a 14-row spout extension is present:
Press button (17) and move the cross actuating lever forward (K); the spout
extension folds in and the spout is lowered.
L
Cross actuating lever central position
M
Lift spout
• If a 12 or 14-row spout extension is present:
Press button (17) and move the cross actuating lever backward (M); the spout
extension folds out and the spout is raised.

NOTE
When the discharge chute flap is raised, the discharge chute extension folds in after a delay of
approx. 2 seconds, as the discharge chute flap is automatically lowered beforehand.
While the discharge chute extension is being folded in or out, the spout flap cannot be actuated.