Info centre "EasyTouch"
185
After the start
Fig. 129
The setting mask appears each time the machine is started and displays the occupancy of keys
M1 and M2.
• Press the key to release the setting. The lock icon turns off.
Only than can the corresponding function be executed using the memory keys on the multi-
function lever.
If no release is performed, the memory keys are not functioning.
If you wish to change an assignment, you can re-assign the keys as described above.
If there is no driver activity in the menu level for approx. 20 seconds, the menu level
closes automatically and returns to the working screen.
The memory keys are not enabled and the memory keys are not working.
Exiting the settings mask
• Press the
key to call up the working screen.
• Press the
key to jump to the next page of the machine settings information section.
• Press the
key on the incremental encoder to return to the previous menu level.
To Next Page
Loading...
