Info centre "EasyTouch"
238
Manual switching between ECO Power, X Power and TRI Power
TRI Power mode cannot be pre-set and can only be accessed if you switch modes manually.
The manual switching from X Power - TRI Power -ECO Power takes place in sequence and is
only possible if the diesel engine is not overloaded.
Fig. 174
The characteristic curves are selected by means of the switch (1) on the multi-function lever.
Each time the switch is actuated, the next available mode is activated.
• Machine is in X-Power mode:
– ECO-Power > TRI-Power > X-Power.
• The machine is in ECO-Power mode:
– X-Power > TRI-Power > ECO-Power.
The current operating mode is displayed in the working screen.
To Next Page
Loading...
