Safety
28
Danger zone between precision forage harvester and header
People staying between precision forage harvester and header could be seriously hurt or killed
caused by precision forage harvester rolling away, carelessness or machine movements.
• Before working between precision forage harvester and header: Shut down and safeguard
the machine, see chapter Safety, “Shutting Down and Safeguarding the Machine”. This also
applies to brief inspection work.
• If the lifting unit has to be actuated, keep all people away from the range of movement of
the header.
Danger zone because objects may shoot out
Crops and foreign bodies may shoot out and injure or kill people.
• Before starting the machine, instruct all persons to leave the danger zone of the machine.
• If people are in the danger zone of the machine, switch off drives and diesel engine
immediately.
Danger zone when drive is switched on
When the drive is switched on, there is a danger to life caused by rotating machine parts. There
must be nobody in the danger zone of the machine.
• Before starting the machine, direct all people out of the danger zone of the machine.
• If hazardous situations arise, switch off drives immediately and instruct people to leave the
danger zone.
Danger zone quick coupler
People may be caught, pulled in or seriously injured by quick coupler and driven parts.
Before switching on the quick coupler:
• Mount all safety devices and move them to protective position.
• Ensure that nobody is in the danger zone of the machine or the universal shaft.
• Switch off the drives if they are not necessary.
To Next Page
Loading...
