Appendix – CropControl System
54
Pos: 12.12 /BA/Info-Center/CropControl BiG X 600-1100-1/Schnellzugriff Beladungszähler auswählen @ 428\mod_1455194332411_78.docx @ 2962864 @ @ 1
Load counter
This function can be used to measure the laden weight and so determine the total weight of the
tractor/wagon combination.
Note
The load counter only indicates the laden weight precisely when CropControl has been
calibrated for the field by means of counterweighing operations and the field is homogeneous
in terms of moisture. Otherwise, major differences may result.
Starting the load counter
• Start the load counter by using function key .
Stopping the load counter
• Stop the load counter by using function key and reset it at the same time.
Pos: 12.13 /BA/Info-Center/CropControl BiG X 600-1100-1/Gegenwiegung starten/stoppen_Calibrate @ 459\mod_1465212857251_78.docx @ 3100006 @ @ 1
Starting counterweighing
• To start counterweighing, press the function key.
The number of the currently active counterweighing is displayed on the status line next to the
icon.
Stopping counterweighing
• Press the function key to stop the active counterweighing.
Pos: 12.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
