17: Command Reference
EMG™ Edge Management Gateway User Guide 372
admin firmware highrestimers
Syntax
admin firmware highrestimers <enable|disable>
Description
Enables high resolution timers required for Performance Monitoring or disables high resolution
timers (the default). Changing this setting requires a reboot in order for the change to take effect.
admin firmware watchdog
Syntax
admin firmware watchdog <disable|180-1800 seconds>
Description
Configures how long the EMG waits for boot completion before forcing a reboot.
admin firmware show
Syntax
admin firmware show [viewlog <enable|disable>]
Description
Lists the current firmware revision, the boot bank status, and optionally
displays the log containing details about firmware updates.
admin firmware update
Syntax
admin firmware update <ftp|tftp|sftp|nfs|usb|sdcard> file <Firmware
File> key <Checksum Key> [nfsdir <NFS Mounted Dir>] [usbport <U1>]
Description
Updates EMG firmware to a new revision.
You should be able to access the firmware file using the settings admin ftp show displays if
FTP, TFTP or SFTP are used to load the firmware file. The EMG automatically reboots after
successful update.
admin firmware clearlog
Syntax
admin firmware clearlog
To Next Page
Loading...
Need help?
General
