Lexmark MX81 series - Page 152

Error code Description Action
382.54 No encoder feedback detected from the output
option 2/finisher/offset stacker main/interface
motor.
382.55 Motor stop error—the output option
2/finisher/offset stacker main/interface motor kept
on running some time after the motor was
commanded to stop.
382.56 The output option 2/finisher/offset stacker
main/interface motor went over the normal speed
383.51 No encoder feedback detected from the output
option 3/finisher/offset stacker ejector motor.
383.52 Motor stop error—the output option
3/finisher/offset stacker ejector motor kept on
running some time after the motor was commanded
to stop.
383.54 No encoder feedback detected from the output
option 3/finisher/offset stacker main/interface
motor.
383.55 Motor stop error—the output option
3/finisher/offset stacker main/interface motor kept
on running some time after the motor was
commanded to stop.
383.56 The output option 3/finisher/offset stacker
main/interface motor went over the normal speed
7463
Diagnostic information
152