Available options:
• Deactivate
• Activate
Download Emuls
This appears only if at least one download emulator (DLE) is installed. The default setting is Disable. All download
emulators (DLEs) are reenabled automatically after two PORs.
Safe Mode
The settings for this menu item are On and Off (default). When enabled, Safe Mode lets the printer operate in a special
limited mode in which it attempts to continue offering as much functionality as possible despite known issues. For more
information about Safe Mode and the Safe Mode print behavior for this model, see “Using Safe Mode” on page 37.
To change the setting:
1 From the Configuration menu, navigate to Safe Mode.
2 Select On or Off to change the setting.
3 Select Submit.
4 POR the printer.
Factory Defaults
Warning—Potential Damage: This operation cannot be undone.
This setting enables a user to restore all of the printer settings to either the network settings (on network models only)
or to the base printer settings.
To restore Factory Default settings:
1 From the Configuration menu, navigate to Factory Defaults.
2 Select from the available options:
• Restore Base—restores all non‑critical base printer NVRAM settings.
• Restore STD Net—restores all network NVRAM settings.
• Restore LES (available on touchscreen model only)—restores the factory default values for all framework,
standard applications and eSF configuration by removing all non‑standard applications; and clears the SE logs.
After this setting is changed, the device automatically performs a POR, and restores the appropriate settings to their
factory default values.
Energy Conserve
This setting controls which values appear on the Power Saver menu.
7463
Service menus
255
To Next Page
Loading...
