Flatbed scanner glass removal
1 Remove the ADF/scanner assembly from the base printer. See “ADF/scanner assembly removal” on page 445.
2 Remove the ADF assembly from the flatbed scanner assembly. See “ADF assembly removal” on page 448.
3 Remove the flatbed left cover. See “Flatbed scanner left cover removal topic” on page 505.
4 Remove the flatbed right cover. See “Flatbed scanner right cover removal” on page 506.
5 Remove the flatbed front cover. See “Flatbed scanner front cover removal” on page 502.
6 Remove the four screws (A) on the top side.
7 Remove the seven screws (B) at the front side.
7463
Repair information
513
To Next Page
Loading...
