3 See the number in the area, as shown in the following image:
Resetting the Roller Kit counter
After replacing a roller kit, the roller kit counter must be reset to zero to clear the “81 Replace Roller kit” message.
To reset the maintenance count:
1 Turn off the printer.
2 Enter the Configuration Menu.
a Press and hold the 2 and 6 buttons simultaneously.
b Turn on the printer.
c Release the buttons after 10 seconds. The Configuration Menu appears on the LCD.
3 Touch Reset Roller Kit Counter from the Configuration Menu.
4 From the options displayed, select the roller kit to reset.
5 Touch Yes to reset the roller kit counter value. Touch No or Back to return to the previous menu.
The roller kit count resets to zero, and the LCD returns to the Configuration Menu.
7463
Maintenance
669
To Next Page
Loading...
